Stuck at low WiFi signal strength?
I have a D-Link Wireless G Router DI-524 in my room which connected to my Local Area Network Card Adapter with SpeedBooster is located in my room and connected to the internet throught the Aztech Wireless USB. I always get really low signal strength, around 5.5Mbps to 11Mbps. I have bought some D-Link 5dBi High Gain Antenna with SMA and TNC connector, I’ve tried them both on router and my PC, I got few extra boost in signal. I think these antennas are way overpriced, so I gotta return them to shop.
I have a D-Link Wireless G Router DI-524 in my room which connected to my Local Area Network Card Adapter with SpeedBooster is located in my room and connected to the internet throught the Aztech Wireless USB. I always get really low signal strength, around 5.5Mbps to 11Mbps. I have bought some D-Link 5dBi High Gain Antenna with SMA and TNC connector, I’ve tried them both on router and my PC, I got few extra boost in signal. I think these antennas are way overpriced, so I gotta return them to shop.
After asking few help, I come up with few solutions. I upgraded the router build-in firmware to HyperWRT v.2 firmware and boost the Transmit Power from 50% to 100% in Advanced Wireless Settings. This is the first solution I got so far, it did improved wifi signal a little bit.
I googled around and found a cheap (but effective) way to boost up my router signal by making a DIY 10dBi Corner Reflector antenna through this site’s instructions. It took me one hour max to finish the 2 antennas. This DIY project is so simple and easy. Now, I fully get up to 54Mbps and 90% signal strength. All this works saved me hundred of dollars on those High Gain Antennas.
I googled around and found a cheap (but effective) way to boost up my router signal by making a DIY 10dBi Corner Reflector antenna through this site’s instructions. It took me one hour max to finish the 2 antennas. This DIY project is so simple and easy. Now, I fully get up to 54Mbps and 90% signal strength. All this works saved me hundred of dollars on those High Gain Antennas.
This is the result that I recieved and tested on Windows machine. May be you wont believe it, but I highly recommend all user to try it to believe it. It really work out of the box.. Why do you have to pay 30 ringgit just to have 10%-20% extended area coverage while you can have 50%-60% extended wireless coverage by do-it-yourself at home?
above: Connection before using aluminium foil. Tested on Windows OS.
above: After using aluminium foil. You can see the signal just boost 50% from before.
Thank you for your unbelievable support on Negative Zero - Permission to read and write blog for nearly 4 years. Don't forget to like Negative Zero on Facebook.
so then how thick the aluminium is?
ReplyDeletewahhh seems like u always using beskal pancit in almost everything in ur life.
what a love
actually I just use a simple kitchen aluminum foil, it's look thick because i used it to cover a hard and thick paper.
ReplyDeleteLove is great patah!
actually, it's her router though..
haha..
hi there.... I think to used alumunium foil not the best to booster wireless, couse I try with dish more powerfull... btw thanks for usefull information
ReplyDelete